A combination of contemporary styling, quality finish and high grade sound performance. In addition, the practicality of being able to charge your Apple iPhone or iPod devices at the same time or switch between playing from one to the other.
With 60W of real power, the Bayan 5 is efficiently set up to drive the 2.1 stereo speaker configuration. The result is volume beyond expectations, adding clarity and depth to the music you hear.
Bayan Audio products are approved with Apple's stringent TDMA Noise Rejection tests, to ensure there in no interference from mobile phones or other radio transmitter devices when in use.
When you dock either your iPod or iPhone into any of the Bayan Audio systems, they will automatically charge whilst playing music.
If you love to listen to internet radio, audio books or podcasts from your iPhone, iPad or iPod Touch, simply switch your Bayan speaker dock from music mode to voice mode. The result is a clearer, more pronounced voice ensuring you don't miss anything.
The remote control shipped as standard with all Bayan Audio products allows you to control all aspects of the docking system. You can select tracks, play, pause or mute. You can also change the level of bass, treble and volume as well as switch the system to standby mode.
As standard on all Bayan Audio Speaker Docks for iPod, we have incorporated ports at the rear that let you plug in your iPad or Tablet and play it through the docking system. You can also charge the iPad directly from these ports (3.5mm audio + USB A type ports)
Bayan Audio is an Apple licensed partner. This means that all the systems we use to connect to your Apple device are original Apple parts, including certain control components. Our products have been tested and certified to Apple standards. This ensures you can use your Apple devices with Bayan Audio products with confidence.
The choice of materials used to build Bayan Audio products is key not only to how they look, but also how they perform.
We have encased the main speaker in 9mm thick wood to produce a more natural sound and to reduce the reflections internally. All speaker frames (which are critical to the sound performance) are made from metal, not plastic. And finally, the amplifier is built using the best components, enabling us to finely tune each Bayan Audio product to achieve the best sound possible for its configuration.
|Amplifier Power Output||30W (bass), 2 x 15W (full range), Total 60W|
|Drive Units||1 x 125mm (5.25 ) bass, 2 x 50mm (2 ) full range|
|Frequency Range||35 Hz to 20 kHz|
|THD (total harmonic distortion)||< 1%|
|Power input voltage||100V - 240V ~ 50 / 60 Hz|
|Standby power consumption||1W|
|Inputs||2 x 30 pin iPod connector, 1 x 3.5mm jack analogue audio, IR remote|
|Outputs||USB A power output for charging iPAD|
|Dimensions||40cm x 20cm x 24cm|
At the rear of your Bayan Speaker Dock is an iPad audio input, next to the Power USB socket marked "audio" (a suitable 3.5mm cable is required), connect the cable from your iPad to this socket and select "Tablet" on the remote control, press play on your iPad and you should hear the media source playing.
On some early models, there is a momentary change in volume when switching between voice and music sound profiles, this is an audible confirmation that the profile has been changed. In addition, the power indicator at the top of the dock will change colour to indicate the new setting.
Yes, although your Bayan speaker dock is specifically designed with Apple products in mind All Bayan audio products can connect to a music product via the 3.5mm audio jack (Tablet input), and in addition, Bayan 1, 3 and Grand have an additional auxiliary input to enable the connection of a third music device to the Speaker Dock using a 3.5mm audio jack (a suitable 3.5mm cable is required). You can also connect a device via Bluetoogh if you have purchased the Bayan StreamPort adaptor.
At the rear of the Bayan Docking System (Bayan 1, 3 & 5, 7) is a 3.5mm Auxiliary / Tablet input, connect your cable from the desired audio device to this socket and select AUX on the remote control, press play on the audio device (Phone, Tablet or MP3 player) and you should hear the media source playing. All Bayan Docking Systems have an additional Aux / Tablet input " connect the cable from your audio device to this socket and select TABLET on the remote control.
Please check that you are using a genuine apple USB cable to charge your iPad " some third party USB cables contain an identification inside them which identify them as a 'charge and power' cable, which can disable the line-out from the iPad so that you cannot get music to play back through the iPad dock - only the headphone socket on the iPad
Make sure that the iPod / iPhone is firmly connected to the dock by removing the iPod / iPhone and re-connecting. Check that the correct sound source button on your remote control has been selected (in this case iPod) and that the volume setting is turned up via the docking station remote control and iPod / iPhone and that the iPod / iPhone is not in the "paused" state. Also check that any additional casing / cover has been removed prior to connection as these may hinder good connectivity.
If you still have the same issue then try a system "reset" by removing the power to the dock, leave for one minute then switch back on and re-connect as above.
The battery stops charging when it is full. Leaving it connected won't charge it any more. It is perfectly OK to leave it connected so that it can charge overnight, for example.
Have you removed the plastic battery isolation insert from the battery compartment before using the remote control?
Infrared (IR) remote controls use light to transmit signal information, they require line of sight to operate the destination device, so remember to point the remote at the receiver lens on the front of the dock.
Depending on usage, the battery may have "low power" and will require replacing from time to time, replace with the correct type and note the polarity of battery when removing and replacing, (when disposing of old batteries, it is important to observe the recycling laws in your country).
Check battery connectivity by sliding the battery compartment out and then back in so that the compartment is fully inserted and secure.
No, the iPhone 5 has the new style connector, however, If you want to use an iPhone 5 and later style iPods on our current range, (we are movong over to a wireless functionality) then you would need to buy an additional bluetooth wireless adaptor such as the Bayan StreamPort or Bayan StreamPort Universal, which plugs into the rear of the Bayan Dock, you would then be able to use the iPhone wirelessly, however, you could still not use the front connector to play or charge the iPhone 5.
Yes, download the Bayan Audio Manual here.